CARSON CITY, NV — (Marketwired) — 03/09/16 — today announced its product lineup for the Applied Power Electronics Conference and Exposition (APEC) 2016, taking place March 20-24 in Long Beach, California. In booth 1833, the company will be showcasing a wide range of its leading inrush current limiters for reliable circuit protection and NTC sensing thermistors for high-accuracy temperature compensation and measurement.
Highlighted Ametherm at APEC 2016 will include the company–s SL series of standard devices with high steady-state current to 36 A, input energy to 300 J, and diameters from 8 mm to 31 mm. AS series devices on display are designed to increase reliability by eliminating hot spots resulting from fatigue. The current limiters feature extremely high steady-state currents to 50 A, 800 J of input energy, and fast reset times. For single- and three-phase input voltages up to 480 VAC, the company will feature the SURGE-GARD and MegaSurge series, which offer steady-state current to 36 A, up to 300 J of input energy, and resistance at 25 degrees C from 0.5 to 220 ohm.
Ametherm–s on display will consist of a variety of probe assembly types, including ring lug (PANR series), epoxy (PANE series), and steel housing (PANH series). Constructed of specially formulated metal oxide ceramic materials that are extremely accurate in temperature sensing, the devices feature resistance at 25 degrees C from 0.5 to 250.0 ohm, beta from 3,500 K to 4,500 K, a dissipation constant of 3 mW/ degrees C, a thermal time constant down to 10.0 s, and maximum power of 125 mW to 300 mW.
In addition, Ametherm will highlight its new , which delivers tight tolerances of +/- 0.2 degrees C between 0 degrees C and 70 degrees C for critical applications. Offering a fast thermal time constant of 10.0 s and available in four resistance values at 25 degrees C — 2.252 k ohm, 30 k ohm, 50 k ohm, and 10 k ohm — the epoxy-coated devices can be potted in a variety of housings for temperature compensation circuits.
Also on display will be glass-encapsulated thermistors for excellent long-term reliability and stability in severe environmental conditions. Hermetically sealed and impervious to moisture, the devices offer an operating temperature range to 300 degrees C — providing a high-temperature alternative to epoxy-coated thermistors — and a quick response time. Highlighted MM series devices, available in optional DIN-Rail-mountable packages for easy installation, feature a thermally coupled configuration and handle up to 80 A of continuous current and 1200 J of energy.
Made in the U.S.A., Ametherm products are recognized by Underwriters Laboratories (UL) and the Canadian Standards Association (CSA International) for ensured safety, and many are RoHS-2-certified (with Exemption 7a and 7(c)-1). The devices are optimized for a wide range of applications, including AC motors, power supplies, motor drives, audio amplifiers, battery chargers, air sensors, HVAC systems, high-speed computers, MRIs, and X-ray machines.
As the premier event in applied power electronics, APEC focuses on the practical and applied aspects of the power electronics business. More information on the conference and exposition is available at .
For more information on Ametherm–s products or to request a sample, visit . Or call 800-808-2434 (toll free in the United States) or 775-884-2434 from outside the U.S. and Canada. Follow Ametherm at the company blog, .
Ametherm, headquartered in Carson City, Nevada, was founded in 1994 and specializes in inrush current limiting power thermistors for circuit protection in the power market industry. Ametherm–s devices are some of the highest rated in the industry and provide the widest range of inrush current protection available. For more information, visit or call 800-808-2434.
Bob Decker
Redpines
+1 415 409 0233
Lori Morton
Ametherm
+1 775 884 2434
You must be logged in to post a comment Login