FOR IMMEDIATE RELEASE
November 7, 2013
Johannesburg, South Africa – Carousel ATC, additionally call Disk ATC, Rotary ATC, Drum Style ATC is a sort of ATC – Automatic Tool Changer for CNC Router with ATC machine that apparatus rack is mounted beside axle for quick instrument change unlike the direct ATC CNC Router that mastermind the instruments at the close of switch table which shaft and gantry needs to move to the closure of table each time an instrument change is needed. Carousel ATC is highly speedy apparatus that gives extreme productivity and also speed.
As the manual carpentry machine, change instrument bits constantly for diverse area of work. To realize better fulfil result and also turnaround time much quicker, you will require Spiral Bits with diverse amounts of Flutes, customer will require dado cut, plunge cut, up cut and down cut, and the agenda will continue forever. Furthermore even not say scoring which can have such a large number of diverse formed furrow bits to finish work in one pass.
One of the executive said that “Our Power route CNC Router has a Carousel ATC with 8 apparatus tray that takes not exactly 8 seconds for entire instrument changing process between two tracking activities, contrasts with direct ATC by and large takes 8 seconds for consume the device alone without numbering the time gantry moves all around the table to achieve the apparatus and reason deviation since no CNC machine has 100% reposition accuracy.”
Without the CNC ATC Router (Automatic Tool Change) capacity, customer can utilize a little finishing/engraving spot to perform the employment from starting and take ages to finish work, or utilize an extensive cutting, easing or roughing touch and get an unpleasant completion, the continuous instrument nibbled change and reposition the CNC Router axle position will make the manual apparatus change get impracticable.
One of the spokesperson said that “I have got a very good service from the Advanced Machinery. I am satisfied by the work of the CNC router.”
Advanced Machinery also provides different material to their clients. They offer all kind of wooden material, plates, and blocks and add sheets which all are fit to the CNC machine.
One of the executive said that, “We utilize a 9kW spindle with maximum torque of 6.4 N-m (newton metre) on revolution between 12000 to 24000 per minutes, which is the perfect RPM for all tool bits and capable of cutting and engraving on material not harder than 60 HB in Brinell Scale, in another word, all solid materials softer than soft brass can be cut or carved.” For more information please visit http://am.co.za/router/atc
#####
Contact:
Advanced Machinery
Website: http://am.co.za
Email: service@am.co.za
Phone: 072 222 2211
Address: PostNet Suite #119
Johannesburg, South Africa
You must be logged in to post a comment Login