MILPITAS, CA — (Marketwired) — 07/09/13 — (NASDAQ: ISIL), a world leader in the design and manufacture of high-performance analog, mixed signal and power management semiconductors, today introduced the , a specified for an output current of up to 1.5A.
Designed for , the ISL75052 is the industry-s only SMD-approved LDO that is single event transient (SET) immune. It is high/low dose rate immune via wafer-by-wafer acceptance testing up to 100krad (Si) and 50krad (Si), respectively. Operating from an input voltage range of 4.0V to 13.2V (14.7V absolute maximum in-beam), the provides output voltages of 0.6V to 12.7V. Output voltage is adjustable based on an external resistor divider setting. Typical dropout voltage performance is 225mV at 1.5A, maximizing efficiency.
The ultra low dropout performance over temperature and radiation lets users reduce the voltage between the input and out voltage rails, saving significant power. The device-s wide input voltage range of 4V to 13.2V allows designers to operate the part over a wide input voltage range, such as 12V, 5V or any in-between voltages. Output voltage accuracy of +/- 2 percent over radiation and over the military temperature range improves point-of-load (POL) input accuracy tolerance over varying AC/DC application conditions. The device-s industry-best 160uA shutdown current, maximum, lengthens battery life when used in a redundant configuration. A PowerGood output pin is available for easy start-up configuration.
SET mitigation with no added filters or diodes for LET of 86MeVcm2/mg reduces board space and system cost
Wafer-by-wafer radiation guarantee means no upscreening, high product reliability
Pin-for-pin drop-in to industry leading solutions
The ISL75052SEH is available now in an 18-lead ceramic flatpack, with prototype prices starting at $261.99 each. For more information visit:
is a leader in the design and manufacture of high-performance analog, mixed-signal and power management semiconductors. The company-s products address some of the largest markets within the industrial and infrastructure, personal computing and high-end consumer markets. For more information about Intersil visit our website at .
Intersil and the Intersil logo are trademarks or registered trademarks of Intersil Corporation. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.
Image Available:
You must be logged in to post a comment Login